The platform is adjustable. It is good for the product quality when lifting the platform, because it will reduce stress and will not hurt the product.
The spacing device applies to products of different size, so as to improve the work efficiency.
Detailed Description
PCB depaneling machine multi cutter
Samtech pcba cutter can apply to LED panel,fiberboard,aluminum plate,aluminum substrate, copper substrate,FR4, glass fiber board and so on.
There are so many pcb cutting machines in the recent market of various of kinds and quality, it usually takes much time to look for a satisfactory pcb separator.
conveyor belt size: 1040mm(L) x 142mm(W) x 127mm(H) weight:11.3KG
conveyor belt packing size: 1090mm(L) x 192mm(W) x 177mm(H) weight:12.3KG
Model number
ASC-508 (no conveyor belt)
ASC-509 (with conveyor belt)
Machine size
600*395*425mm
600*395*425mm
Packing size
640*420*450mm
640*420*450mm
Size of the conveyor belt
none
1040mm*142mm*127mm
Knife material
SHD61 imported high-speed steel
SHD61 imported high-speed steel
Cutting speed
300,500mm/s
300,500mm/s
Cutting thickness
0.2-5mm
0.2-5mm
circular knife size
125mm(diameter)
125mm(diameter)
Blade length
360mm(length)
360mm(length)
Voltage
AC220/110V 50-60HZ
AC220/110V 50-60HZ
Machine weight
43kg
43kg+ 11.3kg
Packing weight
54kg
54+12.3KG
Power
40W
40W
ASC-508, 509 feeding PCB cutter features:
1.ASC-508 separates both small and large pre-scored PCBs.
2.The table and the rest can be continuously adjusted to the most suitable working position. The slit between the linear blade and the rest can be adjusted to ensure that the side strips fall through and are sorted out.
3.Separation of aluminum-boards on request. Blades: Titan coated serially. Frequently for critical components an upper limit of tensile stress will be determined. Please ask us regarding possibilities to reduce tensile stress of components.
4.The PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand across the PCB. The clearance between the upper guide and the linear blade ist adustable to ensure that the PCB is only separated in the pre-scored groove.
ASC-508, 509 pcb separator advantages:
1.After soldering the plate of connecting pieces, it often hurts lines or breaks the electronic parts when breaking.
This machine cuts with feed mode to reduce stress drastically, prevent the solder joint and parts from cracking
and improve the productivity and quality.
2.With circle knife above and anvil blade below, when the board flow to the anvil blade, shift the switch, and the anvil
blade move laterally to the set point, then the PCB board is cut off with smooth incision and no burrs.
The best price please sent the email to : jasonzhang@pcbasc.com
Note : Your information detail will not be published. Required fields are marked
